When a position or status event meets a predefined condition, GrowSpace sends alerts and controls equipment automatically, without waiting for a person to intervene.
The Processing Architecture From Event Detection to Automated Execution
The core technology behind this: receiving position/status events in real time, instantly evaluating them against defined conditions, and automatically executing alerts and control.
※ Actual response speed may vary depending on the connected equipment and network configuration.
Receives position/status events in real time, such as geofence entry, proximity distance, and RFID gate crossings.
Evaluates events instantly against predefined conditions. Multiple conditions can be combined — for example, 'within 3m proximity AND in motion.'
When conditions are met, automatically executes defined actions: notifying staff, triggering alarms/beacons, and stopping or controlling equipment such as barriers.
※ Considerations for Deployment
Rule-evaluation results go beyond on-screen alerts — they extend to on-site signaling devices and equipment control.
Delivers immediate alerts through channels suited to the site: control-room popups, SMS/messaging apps, or alarms/beacons.
Directly controls barriers, equipment-stop signals, and more over industry-standard interfaces.
Automation Level by Hazard-Response Method
To improve on-site response speed and accuracy, the limitations of each response method should be considered.
| Spec | Manual Check & Response | Simple Threshold Alert | GrowSpace Rule-Based Alert & Control |
|---|---|---|---|
| Response Speed | After human notices — high latency | Immediate (single condition) | Immediate (combined conditions) |
| Combined Conditions | Difficult, relies on experience | Not possible (single threshold) | Supported (multiple conditions evaluated together) |
| Direct Equipment Control | Not possible (manual operation only) | Mostly not possible | Supported (PLC/Relay integration) |
| Staffing Dependency | High — constant monitoring required | Moderate | Low — automatic judgment & execution |
Automatically extending to alerts and equipment control, the system responds before a person has to step in.
See Related TechnologyFrom event detection to execution, the process runs automatically without human intervention.
The administrator predefines the conditions that will trigger alerts and control.
Receives position/status events in real time.
Instantly evaluates events against the defined conditions.
Carries out follow-up actions such as sending alerts and stopping or controlling equipment.
Proximity AlertAlerts both sides instantly when the distance between a forklift and a worker closes past a set threshold.
Auto ShutdownAutomatically stops or locks out connected equipment when personnel enter a predefined danger zone.
Gate ControlNotifies staff and, if needed, automatically opens/closes a barrier when an RFID gate crossing is detected.
Increase your site's response speed with GrowSpace Rule-Based Alert & Control.
Tell us which zones need which alerts, and we’ll review the zone design and integration approach first.
